Hi everyone 🙂
Here is a nice little card that is interactive with the receiver.
As you can see, the centre panel pulls down to reveal a message on the inside as well as a hidden message on the underneath section on the front.
Here are the measurements and the video:
Card stock: 8-1/2′ x 5-1/2′ Score on the 8-1/2′ side @ 1/2′ & 4-1/2′
Paper panel: 5-1/4′ x 3-3/4′
Slider panel: 4-3/4′ x 3-7/8′ Place the 4-3/4′ side in the trimmer @ 2′ mark and cut down to 3-1/4′
Front Panel: 4′ x 2-1/2′ (this one fits between the two cut lines)
Slider front panel: 3-5/8′ x 2-1/2′
Small slide panel: 2-1/4′ x 1-3/4′
Here are some pictures to help you see how to cut the card.
These two pictures show you how to cut the front panel of the card (add the paper to the front section before you cut) and keep the 1/2′ score line to your right.
These two pictures show how to cut and insert the slider panel into the card (make sure that you add the thumb punch to the bottom of the card before you add the slider panel)
The paper used: Charlotte paper pack
Stamp sets used: Springtime Wishes C1641 and Wavy Blooms D1651
I hope that you like this interactive card, I found the original on Pinterest.
So till next time,
Keep on creating 😉