Sugar Rush Ice cream Card

Hi everyone 🙂

I’m back from my little holiday and ready to share with you this card using the Sugar Rush paper and the Sugar Rush- Scrapbooking stamp set.

This makes a great card for a little girl or for someone that loves ice cream.

Here are the measurements and video :

Card: 5-1/2′ x 4-1/4′ White Value Pack X254

Matting panel: 5-1/4′ x 4′ in Whisper card stock X5929

Front right panel: 1-3/4′ x 5′ in Blossom card stock X5787

Front left panel: 2′ x 5′ in Sugar Rush Paper X7215B

Shimmer trim: 5′ piece in Aquar Z3086

Circles cut @ 1-1/4′ (cut 3) and the Cone is 1′ cut from, Cricut Artistry cartridge

Banner matting: 3-1/4′ x 3/4” in Whisper card stock

Banner Front: 3′ x 1/2′ in White Daisy card stock 1385

Stamp sets used: Sugar Rush-Scrapbooking  D1715 and Hooked on You B1535

  1. Place the shimmer trim onto the paper panel down one side.
  2. place this panel onto the front of the Whisper panel and but the Blossom panel up against the shimmer trim side.
  3. Attach this panel to the front of the card.
  4. stamp the circles Sea Glass ink with the matching stamp and also the cone in Whisper ink (if you do not have a Cricut then you can just cut out around the stamped images) and place onto the Blossom panel.
  5. Stamp the birthday sentiment in Blossom ink onto the white banner piece and dove tail one end.
  6. Attach to the banner matting and dove tail the end to match.
  7. place onto the front over the bottom of the cone to finish using 3 D fome tape.

I hope that you like this card

so till next time

keep on creating and bye for now 🙂

Advertisements

Money Wallet Card

Hi everyone 🙂

I just thought that I would pop next’s weeks post up now as I’m off on a little cruise with my mum and sister this week…… sunshine, sea and relaxation …I can’t wait 🙂

img_1745

So here it is. This is a money wallet card that I made in my last card class, and it went down a real treat and it’s very ease to make.

Here are the measurements, instructions and video:

Card:

Card Stock: 7, x 8-15/16’ White Daisy 1385

Score on the 8-15/16’ side @ 3’ & 6’

Matting panel: 2-3/4’ x 6-3/4’ Pacifica X5759,  1-1/4′ x 5-1/2′ in Pacifica C5759

Paper panel: 2-1/2’ x 6-1/2’ Some Kinda Wonderful X7217B

Front panel: 1′ x 5-1/4‘ in White Daisy 1385

Thin Cut: Happy Birthday Z3304

Stamp set: Birthday Sparkles B1537

Ink: Pacifica Z2892

  1. Burnish and fold all the score lines.
  2. On the 8-15/16’ side, on the 3rd (2-15/16’ panel), measure in 2’ and make a small mark.
  3. Turn to the 7’ side on the same panel and measure in 2’, and make a small mark.
  4. Place this panel into your trimmer, so that both the marks are in the cutting groove, and cut this section away.
  5. Add adhesive to the opposite end to the cut away section (as shown in the cutting Diagram) and fold up to form a pocket for the money to sit in.
  6. Attach the paper to the matting panel, and place onto the front of the card.
  7. Cut out the happy birthday thin cut, and place onto the front of the card.
  8. Stamp a greeting inside the card.

img_1821

Here is the scoring and cutting guide.

Just to let you know that all thin cuts and thin cut bundles have 25% off in the month of March only. So jump over to you nearest consultant to have a look and maybe purchase some for your self.

I hope that you like this project and give it a go, so till I come home,

keep on creating and bye for now 🙂

Colleen V

Dreamin’ Big Card

Hi everyone 🙂

I hope that you like this card. Its quick and easy to make.

dreamin-big

This card is made using the Dreamin’ Big paper and the stamp set and Thin Cuts Bundle to match. The Happy Birthday is from the “Hooked on You” stamp set.

Here are the measurements, instructions and video:

Card : 5-1/2′ x 4-1/4′ White Value pack X254

Paper: 1′ x 5-1/2′ cut 2 in Dreamin’ Big paper X7218B

Card stock: 1-3/4′ x 5-1/2′ in Poppy X5779

Card stock: 1/4′ x 5-1/2′ cut 2 in Saffron X5778

Card stock: 3/4′ x 3-3/8′ Whisper X5929

Card stock: 1/2′ x 3-1/4′ White Daisy 1385 plus an extra piece for stamping the butterflies on too.

Thin Cut Bundle: Dreamin’ Big Cardmaking Bundle Z3303

Inks used: Poppy Z2852,  Saffron Z2851, Juniper Z2865

Stamp set used: Hooked on You B1535 (Happy Birthday)

  1. Place the paper to the folded edge of the card.
  2. Then but ever other piece up against the edge of the last on to form the pattern in the picture.
  3. Stamp the butterflies and cut them out with the thin cut to match.
  4. Place them onto the front of the card with 3D foam tape.
  5. Butt the white and grey pieces together at one end, make sure that there is an equal boarder of the grey around the white.
  6. Make a cut about 3/8′ up the middle of the level ends (as shown in the picture).
  7. Then cut on the diagonal from one point to the top of the cut line.
  8. repeat this step on the other side.
  9. Then move the white strip up to the other end. This gives you a perfect even boarder around the 3 sides of the banner piece.
  10.  Stamp the Birthday sentiment on to the white piece and place onto the very right hand side of the card as shown.

img_1814

 

I hope that you give this card a go. So till next time,

Keep on creating and bye for now 🙂

Colleen V